 |
|
 |
 |
 |
| Thermal Switch, N.C.,
300°F |
Thermal Switch, N.C.,
150°F |
RTD Sensor, 400°F |
Current Sensing Relay |
Shutter Limit Switch |
| Miltec P/N |
530-05580 |
Miltec P/N |
530-05560 |
Miltec P/N |
530-05750 |
Miltec P/N |
530-05595 |
Miltec P/N |
530-05600 |
| |
 |
 |
 |
 |
 |
| Door Interlock Switch |
Ceramic Standoff,
Bulkhead |
Ceramic Standoff. 1" Cone |
HV Relay, N.C., 24vdc
coil |
Shutter Air Actuator |
| Miltec P/N |
220-00190 |
Miltec P/N |
530-05400 |
Miltec P/N |
010-00710 |
Miltec P/N |
010-00015 |
Miltec P/N |
530-05300 |
| |
 |
 |
 |
 |
 |
|
HV Socket, 1 Pin, Female |
HV Socket, 1 Pin, Male |
LV Socket, 5 Pin, Male |
HV Plug, 1 Pin, Male |
HV Plug, 1 Pin, Female |
| Miltec P/N |
220-40720 |
Miltec P/N |
220-40740 |
Miltec P/N |
530-05900 |
Miltec P/N |
220-40800 |
Miltec P/N |
220-40810 |
| |
 |
 |
 |
 |
 |
|
LV Plug, 5 Pin, Male |
LV Plug, 5 Pin, Female |
Strain Relief |
HV Cable, Shielded, 25KVDC |
HV Wire, 200°C, 25KVDC |
| Miltec P/N |
530-05960 |
Miltec P/N |
530-05950 |
Miltec P/N |
220-40885 |
Miltec P/N |
010-00390 |
Miltec P/N |
010-00380 |
| |
|
|
 |
 |
 |
 |
|
LV Wire, 200°C, 18AWG, Teflon |
High Temp Sleeving,
0.438" I.D |
High Temp Sleeving, 0.278" I.D. |
High Temp Sleeving, 0158" I.D. |
Ballasts and Capacitors |
| Miltec P/N |
010-00380 |
Miltec P/N |
010-00330 |
Miltec P/N |
010-00300 |
Miltec P/N |
010-00310 |
All values and sizes |
| |
 |
Miltec P/N / Arc Length |
Reflector Liner Type |
|
530-03720 / 18" |
Milcure 1000 |
|
530-03720-D / 18" |
Milcure MD (cold mirror) |
|
530-03760 / 23" |
Milcure 1000 |
|
530-03785 / 25" |
Milcure 1000 |
|
530-03800 / 30" |
Milcure 1000 |
|
530-03850 / 40" |
Milcure 1000 |
|
530-03945 / 42" |
Milcure 1000 |
|
530-03915 / 55" |
Milcure 1000 |
| Other Lengths Available - CALL 410-604-2900 |
| |
|
| |
|
The Milcure R shutter set is a direct replacement
upgrade for your Prime UV lamp module. The unique
benefit of being able to replace reflector liners
without removing the shutters will save you time and
make it a simple maintenance procedure.
The Milcure R shutter system is
designed to accept cold mirror reflector liners or standard
reflector liners. The precision clamping feature of the 2-piece
design forces the reflector liner to be securely seated against the
shutter extrusion for maximum heat transfer efficiency and longer
reflector liner life. These patented shutter sets allow you to
replace reflector liners, in minutes, without having to disassemble
the lamp module, or even removing the UV lamp. Shutter sets are
quickly fabricated in our machine shop, usually within one or two
days. Shutter sets come complete with all associated shafts and pins
to allow for an easy retrofit. |
| |
|